Eightwood EWUJ0212 Cable Review
Our verdict
A short, well-rated RF coaxial jumper for connecting antennas, splitters, or signal adapters where a standard cable would be too long. At $9.99 and a 4.8-star average from 225 buyers, it punches above its price for a niche connector.
Check price on AmazonBest for
Short RF patch runs behind a TV, connecting an antenna to a splitter or balun, or tightening up a wall-plate installation where excess cable would be in the way.
Skip if
You need more than a few inches of reach. This is a 1.6 ft jumper, not a room-length cable run.
- Connectivity Rf Connector
- Length 1.6 ft
- Color Male-Male 1.6 Feet
- Weight 0.07 lb
- Priced 20% below the category median ($12.50 across 19 tracked models)
- Length of 1.6 ft - lower than 94% of the 19 models we track
- Weight of 0.07 lb - lighter than 89% of the 19 models we track
Our scorecard
-
Owner rating4.8/5
4.8 average across 225 owner ratings
-
Popularity0.5/5
225 owner reviews, fewer than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other LED, QLED and OLED TVs plus TV mounts, streaming media players, antennas, cables and satellite gear we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
The Eightwood EWUJ0212 is a male-to-male RF coaxial jumper measuring 1.6 ft (about 50 cm). It uses standard F-type or coaxial RF connectors, making it compatible with most antennas, splitters, and wall plates sold in North America.
At $9.99 for a single cable, it sits at a reasonable price for a specialty short-run connector. The 4.8-star rating across 225 reviews suggests buyers consistently get what they expect: a clean, solid connector that handles the short patch duty without issues.
The cable weighs just 0.07 lb, so it adds no meaningful strain to connectors on wall outlets or signal splitters. If you are wrestling with excess cable looped behind your TV stand, this is the kind of short jumper that cleans things up.
Pros
- Compact 1.6 ft length keeps antenna connections tidy
- 4.8-star rating from 225 verified buyers
- Under $10 price point
- Lightweight at 0.07 lb, no connector strain
- Standard RF connector fits most North American antenna hardware
Cons
- Only one length option makes it useless for longer runs
- Low review count (225) means less certainty about long-term durability
- No shielding spec listed to verify signal quality claims
Performance notes
Connectivity type is RF Connector (coaxial). Length is 1.6 ft. Weight is 0.07 lb. No attenuation or frequency spec is listed in the product data, so it should be treated as a standard-grade patch cable rather than a low-loss premium option.
What buyers say
With 225 reviews and a 4.8-star average, buyer feedback is strongly positive for a niche product. The sample size is modest, so a few bad experiences could shift that number, but no large wave of complaints shows up in the rating data.
Specifications
| Connectivity | Rf Connector |
|---|---|
| Length | 1.6 ft |
| Color | Male-Male 1.6 Feet |
| Weight | 0.07 lb |
Similar LED, QLED and OLED TVs plus TV mounts, streaming media players, antennas, cables and satellite gear to consider
Frequently asked questions
What is this cable used for?
It is a short RF coaxial jumper primarily used to connect an antenna to a splitter, wall plate, or signal amplifier. The male-to-male configuration lets you bridge two female ports that are physically close together, keeping the installation clean without leaving a long cable coiled up.
Will it work with my over-the-air TV antenna setup?
Yes, as long as your antenna and the device you are connecting to both use standard RF (F-type) coaxial ports, this cable should work. It is a passive cable with no active components, so it handles standard OTA antenna frequencies. Check that both ends of your connection are female RF ports before ordering.
Is 1.6 ft long enough for most setups?
That depends entirely on your installation. For connecting a splitter directly to a wall plate, or running from an amplifier to a TV sitting next to it, 1.6 ft is often the right call. For any run across a room or behind a large entertainment center, you will want a longer cable.