Compare TV Wall Mounts Side by Side
Picking the wrong TV mount is an easy mistake to make. Weight capacity, VESA pattern and compatible screen size range all vary significantly between models, and a mount that looks similar on the shelf can have a 50 lb difference in load rating or support a completely different set of VESA hole patterns.
This comparison table pulls real manufacturer specs for TV wall mounts side by side so you can sort and scan by max load in pounds, VESA compatibility, physical dimensions and mount weight. Every figure comes directly from the manufacturer spec sheet, not estimates.
Use the table to narrow down mounts that fit your TV's VESA pattern and fall within the safe weight range for your panel. If you have questions about a specific model, check the listing or contact us at hello@raltv.com.
Comparison table
Click a column header to sort.
Frequently asked questions
What is a VESA pattern and how do I find mine?
VESA pattern refers to the distance in millimeters between the four mounting holes on the back of your TV, measured horizontally by vertically (for example, 400x200). You can find your TV's VESA pattern in the owner's manual or the manufacturer's spec page. Always confirm the pattern before buying a mount, since an incompatible pattern means the mount hardware will not align with your TV.
How do I know if a mount can hold my TV's weight?
Check your TV's listed weight in its spec sheet, then compare it against the mount's max load rating shown in this table. Give yourself some margin, since a mount rated right at your TV's weight leaves no room for error. Most 55-inch TVs weigh between 35 and 55 lb, while 75-inch and larger panels can exceed 100 lb.
What is the difference between fixed, tilting and full-motion mounts?
A fixed mount holds the TV flat against the wall with no movement. A tilting mount lets you angle the screen up or down, which helps reduce glare when the TV is mounted high. A full-motion or articulating mount swings out from the wall and pivots, giving you the widest viewing angle flexibility. Full-motion mounts typically have higher weight ratings and heavier hardware than fixed mounts.
Does mount weight matter for installation?
Mount weight matters mainly during installation, since a heavier bracket is harder to hold in place while securing it to the wall. For wall stud installations, weight is rarely a limiting factor. If you are mounting into drywall anchors without studs, check the anchor weight ratings carefully against both the mount weight and the TV weight combined.
Can I use one mount for different TVs over time?
Yes, as long as the new TV's VESA pattern and weight fall within the mount's listed ranges. Many mounts support a span of VESA sizes and carry enough load capacity to handle several common TV sizes. Check the compatible screen size range listed by the manufacturer to confirm fit before swapping panels.